CAE Based Testing (CBT)
The purpose of this investigation is to Utilize Electrically Oriented Simulation Data...

High Power Electrical Systems
In this project, CAE modeling, simulation, and analysis of electrical components and subsystems of a dual voltage system is performed. A dual-voltage system ...

Wire Harness Knowledge Based Engineering (WH_KBE)
WH_KBE is a tool which synchronizes data from the start (PA), between ECAD and MCAD. Optimization through automation. Constant Circuit Synchronization, therefore,...

Virtual Driving System (VDS)
This project is about the modeling and simulation of the driveline of a car based on forward-facing approach. There are two approaches in modeling and simulation of...

Integrated Starter Generator (ISG)
In this project, CAE modeling, simulation, and analysis of electrical components and subsystems of a integrated starter alternator (ISG) is performed. The circuit simulation...

Vehicle Integration Processor (VIP) Embedded System
Vehicle Integration Processor (VIP) provides the Multimedia Head Unit (MHU) with the followings...

Total Vehicle EDS Simulation
Most of us take our cars for granted. We open the door, adjust the seat and turn the key in the ignition. The engine fires up and we pull out into the street. All the vehicle...

eBookshelving
eBookshelving system provide an optimized dynamic depository of all CAE-based activities for a particular setting. eBooksheving system contain...

Transmission Control Module (TCM)
Transmission Control Module is used to control the electro-hydraulic solenoid valves in hydraulic circuits, which actuate the clutches. Product consists of modeling...